Onboard ARB Compressor Engine Bay Mount

Yes, this bracket is specifically designed for the 1995-2004 Toyota Tacoma (1st Gen). It provides a secure, bolt-on solution for mounting an ARB air compressor in the engine bay. The bracket is compatible with all factory engine options, including the 2.4L 4-cylinder, 2.7L 4-cylinder, and 3.4L V6. No drilling or permanent modifications are required.

Most 1st Gen Tacomas did not come with ABS, but if yours does, the pump is typically mounted on the driver’s side, integrated with the master cylinder and brake booster. Since this bracket installs on the passenger side, ABS does not affect fitment.

Yes! If your Tacoma is equipped with ABS, the system is mounted on the driver’s side and does not interfere with this bracket, which installs on the passenger side. No modifications are required.

In most cases, no, this bracket is designed to fit alongside the factory cruise control module (CCM) without interference. However, in some instances, the CCM may need to be slightly repositioned. To accommodate this, the bracket includes a built-in relocation threaded stud, allowing the CCM to be moved forward by a couple of inches, ensuring full compatibility with 1995-2004 Tacomas.

No. This bracket is designed to fit within the engine bay without interfering with key OEM components. For 1995-2004 Tacomas equipped with a factory Cruise Control Module (CCM), the bracket includes a built-in relocation stud, allowing the CCM to be shifted forward by a couple of inches for proper clearance. This ensures full compatibility without requiring major modifications.

Contact Us

Yes. This bracket is fully compatible with onboard air tank setups. While there is not enough space beneath the bracket to mount an auxiliary air tank, you can install a tank elsewhere on the vehicle—such as under the bed, frame, or cargo area—and connect it to the compressor using a longer stainless steel braided hose. This setup allows you to expand your air system for higher air volume without affecting bracket fitment.

Yes. ARB offers a Remote Air Intake Relocation Kit that allows you to route the air intake to a cleaner, drier location inside the cab or elsewhere in the engine bay. In most cases, there is ample space to install the relocation kit, helping to protect the compressor from dust, water, and debris.

Yes, but relocation is recommended for extreme conditions. If you frequently drive in dusty, muddy, or wet environments, using an ARB Remote Air Intake Relocation Kit will help keep the compressor’s intake free of debris and moisture.

Yes! There is no interference with common 1st Gen Tacoma snorkel kits.

Yes, this bracket works with most aftermarket cold air intakes, snorkels, battery relocation kits, and other modifications, provided they do not occupy the same passenger-side fender area. If you have extensive modifications, double-check clearance before installation.

Yes, in most cases. This bracket is designed to fit within the factory engine bay layout and should not interfere with most aftermarket hood strut kits. However, some hood strut brackets may mount in the same passenger-side fender area. We’ve tested with passenger-side hood struts and they clear this bracket with an ARB twin installed. If you are running aftermarket hood struts, we recommend checking clearance before installation.

Yes, installation is fully reversible. This bracket mounts using existing factory holes, meaning you can remove it and return your Tacoma to stock condition without any cutting or drilling.

Installation requires basic hand tools, including a socket set, wrenches, and a ratchet. A torque wrench is recommended to ensure fasteners are properly tightened. A step-by-step guide is provided in the installation manual.

Most installations take about 15 minutes. If your Tacoma has ABS, extra care should be taken to route the compressor wiring and air lines around the brake components, but no major modifications are required.

No drilling, cutting, or welding is required. This is a fully bolt-on installation using factory mounting points. It is designed to be installed with basic tools and minimal effort.

This bracket is specifically designed for the passenger-side engine bay. While it may be possible to modify it for other locations, this would require custom fabrication. Please note that any modifications will void the warranty. That said, we love seeing the creative ways people adapt this bracket to their unique setups—so if you do, be sure to share your build with us!

This bracket is designed to securely mount ARB air compressors, including:

• ARB CKSA12 – Compact, ideal for air lockers but not suited for tire inflation.
• ARB CKMA12 (12V Single) – A versatile option capable of inflating tires and general off-road use.
• ARB CKMA24 (24V Single) – 24V version of the CKMA12.
• ARB CKMTA12 (12V Twin) – High-output twin compressor, great for off-road adventures and air tools.
• ARB CKMTA24 (24V Twin) – 24V version of the CKMTA12.

💡 Running an ARB compressor? This bracket provides a stable, secure mounting solution designed for rough trails and tough conditions.

👉 Considering other compressor brands? See: What other air compressors are compatible with this bracket?

This bracket is also compatible with:

• Up Down Air EGOI II – A high-output twin air compressor designed for off-road and overlanding setups.

💡 Running a different compressor? Check its dimensions and mounting points to ensure proper fitment.

👉 Using an ARB compressor? See: What ARB air compressors are compatible with this bracket?

Yes! If your setup requires an ARB Air Locker Manifold (ARB 171503), this bracket is designed to accommodate it right out of the box.

The manifold mounts to the underside of the bracket, positioned near the firewall. This placement provides easy access to the quick-release coupling for air tools, as well as the front and rear air locker solenoids and air lines, ensuring convenient maintenance and serviceability.

Yes! This bracket is designed to work with most aftermarket cold air intakes, snorkels, battery relocation kits, and other engine bay modifications, as long as they don’t occupy the same passenger-side fender area. If you have extensive modifications, we recommend checking clearances before installation.

Yes, everything needed for installation is included. This kit comes with high-quality stainless steel fasteners to ensure a secure and corrosion-resistant installation.

Absolutely. While designed specifically for mounting ARB air compressors, this bracket features a versatile design. Some users have adapted it for mounting winch controllers, switch panels, relays, auxiliary fuse blocks, and other off-road accessories. If you’re thinking about repurposing it for a unique setup, be sure to verify fitment first.

This bracket is made from heavy-duty, CNC-cut steel for strength and durability. It is finished with a textured black powder coat to provide long-lasting protection against corrosion and harsh elements.

The kit includes stainless steel bolts, washers, and lock nuts to ensure a secure, rust-resistant installation in your Tacoma’s engine bay.

No, wiring is not included. This bracket provides a secure mounting solution, but you will need to use the ARB wiring harness or custom wiring depending on your setup. We recommend using an appropriate gauge wire and fuse protection for safe operation.